Skip to content
TR EN ES
Get the demo

November 15, 2026 · 11 min read

Drag-and-Drop Parametric Cabinet Layout

Drop a module from the palette onto the wall, swap it, type millimetres. How drag-and-drop layout works in CabinetWizard, room by room.

Drag and drop screen: module palette on the left, wall elevation with codes and widths on the right

You've measured the wall, and the customer says "a wardrobe here, a bookcase in the corner". Laying that out on paper takes an hour; working out the parts with a calculator takes another. In CabinetWizard you do the same job by grabbing a module from the palette on the left and dropping it on the wall. This article explains how drag-and-drop layout works, which rules it follows, and why the cabinet you drop is not just a picture but a set of parts ready to cut.

What does drag-and-drop cabinet layout actually mean?

On the surface it's simple: you pick a module up with the mouse and drop it on a wall. What matters to us is what you're dropping. In the program, drag-and-drop modules, meaning the ready-made cabinets you move from the palette to the wall, are built from real, separate parts: side panels, top and bottom, shelves, back panel, door. The moment a module lands on the wall, its cutting sizes are already calculated.

That's what we call parametric cabinet design: width, height and depth are variables, and when you change one, every part tied to it is recalculated. Take a 600 mm base unit down to 500 mm and the bottom, shelf and door follow; you don't work out the shelf length yourself. We call these parametric dimensions because they aren't fixed numbers, they drive the rest of the cabinet.

Drag and drop screen with module palette and wall elevation
Palette and search box on the left, wall elevation on the right. Every module you drop shows its code and width on the elevation.

How are the palette and the 245-module library organized?

The program ships with 245 ready modules, and each one has its own code: two letters and two digits. On the card and in the scene the name reads code + description + width, for example "AC05 Base 1 small + 2 large drawers 60". The search box finds codes too, so typing "AC05" works as well as typing "drawer". The Module Library window has kitchen base, wall and tall units plus Wardrobe, Bedroom, Living / TV, Entrance, Bathroom, Study and Panel / filler categories.

In the drag and drop palette you'll find Favourites, Kitchen base, Kitchen wall, Kitchen tall, Bathroom and Panel / filler. If you've saved one of your own cabinets to ⭐ Favourites, it comes back from the palette exactly as you saved it, contents included. The 450 mm shoe cabinet your shop builds every week, or the hall unit with your own shelf spacing, lands on the wall with one drag.

Module Library window with coded base unit cards
Module Library: search, categories, and on every card width × height × depth plus what's inside.

What happens when you drop a module? The layout rules

The hint line under the drawing puts it in one sentence: drag a module from the left onto the wall; a module dropped on an occupied one takes its place, a module dragged along the wall swaps places, and a module dropped on another wall's tab moves to that wall. In practice:

  • Drop on an empty spot: the module sits there.
  • Drop on an existing module: the new one replaces it. Customer wants drawers instead of a door on that 600 unit? No delete and re-add.
  • Drag a module along the wall: it stops when it touches its neighbour and the screen says "Stopped at the neighbour"; drag past the neighbour's middle and the two swap.
  • Move to another wall: drop it on that wall's tab at the top (e.g. "Wall 2 · 4200").

A mouse isn't always precise enough, we know. So you can pull the selected module's width with a handle or simply type millimetres. The left and right arrow keys nudge the module 1 mm, 10 mm with Shift. Hinge side is on the same card.

Copying and closing gaps

Need three of the same cabinet? Ctrl+D puts a copy right next to the selected module in the same row; if there's no room on the right it goes left, then to the nearest gap. If there's no room at all it says "No room on this wall." and squeezes nothing in. Ctrl+C / Ctrl+V pastes onto another wall too.

Click the leftover gap at the end of a wall and a "Fill the remaining gap" box opens. For a gap of 150–1200 mm it offers a single module; for wider ones two equal modules or a standard module plus a filler; under 300 mm it uses a filler panel only. It works the same in the base, wall and top rows.

Not just kitchens: wardrobes, walk-in closets, kids' rooms, entryways

Drag-and-drop layout works in the kitchen too, but this article is about filling a room's walls with cabinets in general. We cover the kitchen side in Drag-and-Drop Kitchen Design.

When you open the plan you pick a room type: Walk-in closet, Children's room or Hallway. There are 7 ready room templates for them. If you'd rather not start from a template, draw the wall and press ▦ Fill the wall. The program splits the free run into 450, 500, 600, 900 and 1000 mm modules, closes up to 150 mm with a filler panel, puts a low unit under the window, and places an L corner wardrobe or a corner panel in the corner. If the wall has a column that can be notched, the cabinet is notched right there.

A concrete case: a 2700 mm bedroom wall with a 400 mm column at the right end. Fill the wall and the wardrobe modules line up, with the carcass in front of the column notched in place. Then you drag two 500 mm units onto the 1000 mm module, because the customer wants a mirror door in the middle. You can see columns and beams in action in the column section on the home page.

The library also has L corner wardrobes (GK01–06), desks, desk shelves, wall shelves, low bookcases and bed bases for these rooms. They all move with the same palette logic.

Recesses, projections and doors: what does the layout watch for?

Walls are rarely straight. When a wall has a projection, the program's rule is to keep every cabinet front on one line: if a 350 mm deep cabinet has a 100 mm projection behind it, that cabinet becomes 250 mm deep. The rule is the same in drag and drop, wall drawing, the wizard and free placement. If the projection is too deep, a cover panel goes in front instead of a carcass. You can also make any module shallower from the back yourself with ⇥ Make shallower.

No cabinet goes where a door swings; the door arc is drawn on the plan and a module dropped there isn't built. When there's no room, the program never lets cabinets overlap; it simply doesn't do the move. For a cabinet shop, that means fewer units coming back with "didn't fit on site".

Getting inside a cabinet: the Assembly screen

Layout's done, but you want a hanging rail and two drawers inside the 900 mm wardrobe. Double-click the module on the wall and it opens on its own in the Assembly screen. Every panel is its own row there: type its size, tick the edge banding on the right, left, top or bottom edge, add shelves, add dividers. The ↩ Back to kitchen button is always visible; when you go back the module is saved and sits in its place on the wall.

Panel card: size, position, opening and edge banding
Panel card: width, height, thickness, position, hinge side and edge banding edge by edge.

Doors are just as easy. The program has 386 door designs, and each one is built to the door's size. Door styles, meaning slab, framed or patterned fronts, change in bulk with ☑ Select similar on the right-click menu; the 🎨 Door and handle window lets you pick door design, handle type and handle finish from thumbnails. Handle type, hole spacing and position are set separately. Because carcass and door materials are chosen separately, a finish change, such as keeping the carcass white and switching the doors to walnut, also shows up in the material column of the cut list.

From layout to cutting: where does the speed come from?

Placing modules on a wall takes minutes; the real time goes into turning that layout into a parts list. To us, fast cabinet design doesn't mean drawing quickly on screen, it means what you've drawn is ready for production at the same moment. That's where time-saving cabinet design comes from: you type a size once and never carry it anywhere a second time.

When the layout is finished, the automatic cut list, meaning a list that builds itself with each part's name, quantity, cutting size, material and banding, is already there. That cut list has separate columns for grain direction, which way the board's pattern runs on the part, and edge banding, the thickness of the PVC strip glued to the visible edge. In production settings you choose "Front edge only" or "Every visible edge · not the back" for PVC.

The cutting plan is an automatic sheet layout: a drawing that shows which panel lands on which board and where. On the CNC side the program does sheet nesting, arranging parts on the board with the least waste; door parts aren't rotated so the pattern stays intact. You'll find more in Enter the Dimensions, CabinetWizard Does the Rest and in the cutting section.

The same place lets you export to CNC, turning the design into files the machine reads. Output comes as CNC/DXF: NC (G-code) files are packed one program per sheet, and the DXF opens in the CAM software your shop already uses. Behind all of this is CabinetWizard's own CNC cutting and machining system: the Part Machining screen, a tool library and machine profiles. The generated code is read back and checked; if something is wrong, no file is produced. That's what we mean by error-free CNC cutting: the size you set on screen reaches the list, the label and the machine file as the same number, with no hand-copied figure in between. As we say on the site, you go from design to the CNC cutting file in 15 minutes.

For a shop doing CNC cabinetmaking, drag-and-drop layout stops being a sketch for the customer and becomes the work order for the cutting room.

Smart, dynamic, studio: what the words mean

Let's define a few terms clearly, so it's obvious what we're promising.

  • Smart kitchen design here doesn't mean connected appliances; it means planning where cabinets place themselves around the door swing, services and columns. The same logic works on a wardrobe wall.
  • Dynamic kitchen design means a plan where cabinets re-arrange when a size changes and the front line never breaks. In a room plan, add a projection and the fronts still stay in line.
  • A dynamic settings page is a settings screen where changing a value recalculates the cabinets tied to it: Workshop Standards, Walls › Dimension standard, Machine Profile, Divider Settings. For example, change the crown cover in Dimension standard from 100 to 150 mm and the top cabinet height adjusts by itself.
  • Kitchen cabinetry design and wardrobe design are done in the same program with the same palette; the only difference is the room type you pick.
  • By cabinet design studio we mean desktop software where design, 3D, rendering, quotes and production output sit in one window, with no other program needed. CabinetWizard is a standalone Windows program.

For quoting, there's a per-module or per-linear-metre price mode; as the design changes, the quote is regenerated from the same project. For the program's own current price and launch terms, see the pricing section.

Frequently asked questions

Can I change the size of a cabinet after dropping it?

Yes. Pull the selected module's width with the handle or type millimetres; double-click to edit each panel in the Assembly screen. The parts and the cut list are recalculated immediately.

Does it work for rooms other than kitchens?

Yes. Walk-in closet, children's room and hallway are room types, with 7 room templates and ▦ Fill the wall. The library has wardrobe, bedroom, living / TV, entrance, bathroom and study categories.

What happens when the wall runs out of room?

The program never overlaps cabinets. When copying with Ctrl+D and there's no space it says "No room on this wall."; for a narrow leftover gap, "Fill the remaining gap" suggests a filler.

Is drag and drop available in the demo?

Yes. The free 5-day demo includes design, 3D, rendering, project saving and GLB. Production outputs such as NC, cut list, cutting plan, DXF, quote, labels and assembly sheets are in the full version. For other questions, see 14 key questions.

By Ufuk Şen, developer of CabinetWizard

Keep reading

← All articles