CNC Cabinet Software: From Design to Machine in One Project
You build the cabinet on screen; sheet layout, NC program, DXF, hole table and labels all come from the same parts. Dimensions are never retyped on the way to the machine.
What should you expect from cabinet software for CNC?
When a CNC router ruins a sheet, the machine is rarely to blame. The mistake happens where a dimension gets carried by hand from a notebook to a list and from the list to a machine program. Good CNC cabinet software should remove that hand-off entirely.
In CabinetWizard every cabinet is built panel by panel, and every panel is a real part. The cut list, sheet layout, NC program and DXF are all generated from those parts. Error-free CNC cutting, meaning every part off the sheet matches the drawing in size, holes and banding, depends on the data coming from one source before it depends on machine accuracy. As we say on the site, you can go from design to the CNC cutting file in 15 minutes.
Export to CNC: from design to sheet
The export to CNC step is where parts and holes turn into machine files; you never copy a list from one place to another. First comes sheet nesting, laying parts out with as little waste as possible. The router layout leaves exactly one bit diameter between parts, so neighboring parts share the same toolpath channel. If your shop wants more clearance, just enter a slightly larger bit diameter.
Grain direction is respected: patterned doors are not rotated. Small parts that could shift on a vacuum table are listed separately, with a size limit you set. The result is an automatic sheet layout: which part is on which sheet, yield and a waste summary.

What CNC outputs do you get?
Every file for the machine and the shop comes out of the same project:
- NC program (G-code): one program per sheet, packed in a .zip with a read-me text file.
- Batch DXF: all parts in one file.
- Per-part DXF (.zip): separate contour, info and hole layers; the hole layer carries type and face, so the operator machines each face separately.
- Hole table: as CSV.
- Sheet layout: sheet drawings from the Cutting Plan, as PNG or PDF.
- Labels: 50 × 30 or 70 × 40 mm part labels with QR code, plus module labels.
- Cut list: CSV and PDF; details on the cut list software page.
All of this is calculated by CabinetWizard's own CNC cutting and machining system, which builds toolpaths straight from the design and reads the generated code back to check it.
DXF or NC? Working with your CAM software
If your machine reads G-code directly, use the NC package. If you drive the machine through your own CAM software, a separate program that calculates toolpaths, the CNC/DXF output opens in the CAM software your shop already uses. No need to change how you work.
The program writes generic ISO G-code. If you want to know how it fits your machine or post-processor, message us on WhatsApp with your machine model and we will look at it together. We recommend proving out the first job with a test part.
In what order does the NC program cut?
- Drill holes first: shelf pins and hinge plates.
- Then larger holes with the router bit: blind ones as pockets (e.g. 35 mm hinge cups), through holes as helical cuts.
- Outside contours last, smallest parts first, in multiple passes.
Contours come last so every hole is drilled before the part separates from the sheet. An onion-skin pass can be turned on for small parts. Anything the machine cannot do is never silently skipped; it is listed in that read-me file as a manual operation.
In the Tool Library, diameter, step-down and feed are your values. The Machine Profile sets the code format; generated code is read back and checked, and if there is an error, no file is produced. For a profile not yet verified, you get a test program and a checklist. More in accurate CNC cutting for cabinets.
Column notches, patterned doors and revisions
Where a column or beam is in the way, the cabinet is notched in place, and the notch goes to the cut list, NC and DXF at the same size (automatic notching). For patterned doors, pick or draw the pattern in the Part Machining screen; the pattern is carved first and the contour cut last.
If the customer narrows a cabinet after the job is in production, you don't recut the whole job: list, layout, NC and labels come out for the changed parts only. A broken part is found by its code or QR code and sent back to cutting. Before any production output, the program asks you to confirm that you will check sizes, quantities and layout yourself; when the design changes, that confirmation is cleared. We walk through the full kitchen-to-CNC flow in this article, and you can try a single cabinet first with the free cut list calculator.
FAQ
Which CNC machines does it work with?
It produces generic ISO G-code and DXF. Ask us on WhatsApp about your machine or post-processor, and prove out the first job with a test part.
Can I open the DXF in my own CAM software?
Yes. Batch and per-part DXF open in the CAM software your shop uses; holes sit on their own layer.
Are CNC outputs in the demo?
No. The 5-day free demo opens design, 3D and rendering; NC, DXF, cutting plan and labels are in the full version. See the price page for terms.
Do I need separate toolpath software?
Not if your machine reads G-code; the NC program is generated straight from the design. If you work with DXF, keep using your existing CAM software.